Ricoh RDC-i700 User Manual

Page 154

152

Set [Direct Upload Route directory] and [Direct Upload Log file
name].

Direct Upload Route directory :
Specify the folder to receive the incoming file. If you wish to specify a folder on
the camera side, leave blank.

Direct Upload Log file name :
If you wish to make a log file (a record of connections and transmissions) for
Direct Upload, input the file name here. No log file will be made if there is no
entry.

Note

• Setting of the port number, user name and password is not required.

Click on [Start].

Direct Upload is in standby status.
To use direct upload from outside the company, before leaving the company do
not forget to open this screen and click on [Open].

If you click on [Conceal], the window will be closed and the icon will be added

at the right end of the task bar. By clicking on the icon, you can display the
original window.

Note

• If you want to change the settings after clicking on [Open], click on

[Apply] (The settings will be applied in the standby status.).

Important

Note

• When the dial-up server does not operate properly despite the correct

configuration of the receiving PC for Direct Upload, check the dial-up
settings.

→

P.172 “Checking the Dial-Up Settings”