Ricoh RDC-i700 - Manual (Page 146)

144
For Macintosh
This section explains how to use the TWAIN function on a Macintosh.
A
Check that the camera is properly connected to the PC, that the
camera is turned on and that the camera’s mode dial is set to
[
].
B
Mount the storage media of the camera to which you want to
download using the RDC-7/i700 Mounter.
Instructions on how to mount the camera media, see “Using the RDC-7/i700
Mounter” (P.131).
C
Start up the application software compatible with TWAIN on the
PC.
The explanation given here is based on [Photoshop] application software.
D
Select [TWAIN Aquire...] from the [File] menu.
The names of the functions in the menu may differ depending on the
application software. For further details, refer to the operation manual for the
application software.
Note
• If more than one item of TWAIN-compatible equipment has been
connected, it is necessary to select which TWAIN equipment you will
use before performing the operation described above. Use the function
titled [Select TWAIN Select...] or similar. In most cases, this item is
found next to [TWAIN Aquire...]. For further details, refer to the
operation manual for the application software.