Ricoh RDC-i700 - Manual (Page 152)

150
■ Preparing the Receiving PC
When installation of the software is completed, perform the following operation
to put the telephone in standby status. When a direct upload call comes from
the camera, the telephone will automatically switch to receiving mode.
A
Double click on [My Computer] and then double click on [Dial-Up
Networking].
B
Select [Dial-Up Server...] from the [Connections] menu.
The dial-up server setup screen will be displayed.
C
Select [Allow caller access].
D
Click on [Change Password...].
The password setup screen will be displayed.
E
Select a password.
If you are selecting a password for the
first time, leave the [Old password]
area blank. Enter your password in
the [New password] and [Confirm new
password] areas.
The password entered here becomes the camera password for direct upload.
F
Click on [OK] to close the password window.