Ricoh RDC-i700 - Manual (Page 93)

91
4
Changing the Camera Settings
Setting FTP Upload
This section explains how to set the dial-up account for FTP upload, the FTP
server address as the upload destination, the user account name, password,
etc.
Note
• For details of how to use FTP upload, refer to “Uploading an HTML
File” in the ‘Communication/Internet’ operation manual.
• For details of each setting, refer to “Setting FTP Upload” in the
‘Communication/Internet’ operation manual.
Displaying the FTP Upload Dial-Up Accounts
This function enables you to display the list of dial-up accounts for FTP upload
stored in the camera.
A
Check that the camera is properly connected to the PC, that the
camera and the PC are turned on, and that the camera’s mode dial
is set to [
].
B
Start up the browser by the PC, input the IP address and display
the camera’s homepage.
See • P.28 “Opening the Camera’s Homepage on the Browser”
C
Click on [SET-UP].
D
Click on [FTP UPLOAD].