Roland V-Arranger Keyboard VA-76 User Manual
Page 85
87
VA-76 – Upper2 functions
1. Press the Keyboard Mode [OTHER] button.
The display now looks more or less as follows:
2. If the display does not look like in the above illus-
tration, press the [KEYBOARD MODE] field in the
upper right corner, and the [SPLIT] field.
Both must be displayed in white.
3. Press the [UP2 Split] field.
This field is now displayed in white and the keyboard
is split at the G5, with the UP1 part to the right, and
the UP2 part to the left of this second split point.
See page 37 for how to assign the desired Tone to the
Upper2 part.
Note: UP2 Split only works if the Upper1 (UP1) part is
active. It is impossible to program an Upper split without
using the Upper1 (or VariPhrase) part. Once UP1 has been
switched on (automatically or manually), you can, how-
ever, switch it off. Furthermore, the UP2 part will be
switched on as soon as you press the [UP2 Split] field.
If you don’t agree with this split point (G5), you can
change it to any note between the F#1 and G7 (but
never to the left of the main split point):
This clever system helps you to avoid that the UP2
Split zone “covers” either the LW/Arranger or the UP1
zone. There will thus always be room for the zones to
the left and right of the UP2 zone.
4. Press the [Options] field.
The display now looks more or less as follows:
5. Press the [Upper2 Functions] field to select the fol-
lowing display page:
As you see, the [UP2 Split] on this page already lights.
If you no longer needed this function, you could use
this field to switch it back off again. But that is not
what we want to do here.
6. Use the [o][k] fields to the left and right of the
keyboard for selecting the new split point.
7. Press [EXIT] to return to the Master page.
Note: If you are satisfied with your split point, you should
save it to a User Program (see p. 127).
The UP2 Split function can be cancelled in two ways:
• Press the [UP2 Split] field again so that it turns blue
(either on this page, or on the opening display page
when the [KEYBOARD MODE] and [SPLIT] fields
are displayed in white).
• After pressing the Keyboard Mode [OTHER] button,
press the [WHOLE] field to switch off the SPLIT
mode.
ON/OFF
SYNC
MELODY
INTELL
OTHER
DOWN
FREE PANEL
UP
ARRANGER
PIANO
TRANSPOSE
M-FX
KEYBOARD MODE
USER PROGRAM
CONTROLLERS
EFFECTS
ONE TOUCH
MIN
MAX
M-VALUE
Possible range for UP2 Split
VA-76.book Page 87 Friday, January 12, 2001 12:35 PM