Raritan Computer DKX2-V2.3.5-0N-E - Manual (Page 32)

Chapter 2: Installation and Configuration
23
2. All KVM target servers must be configured to one of the display
resolutions supported by the KX II. The most popular supported
resolutions for Sun machines are:
Display resolution Vertical refresh rate Aspect ratio
1600 x 1200 60 Hz 4:3
1280 x 1024 60,75,85 Hz 5:4
1152 x 864 75 Hz 4:3
1024 x 768 60,70,75,85 Hz 4:3
800 x 600 56,60,72,75,85 Hz 4:3
720 x 400 85 Hz 9:5
640 x 480 60,72,75,85 Hz 4:3
3. KVM target servers running the Solaris operating system must output
VGA video (H-and-V sync, not composite sync).
To change your Sun video card output from composite sync to
the nondefault VGA output:
1. Issue the Stop+A command to drop to bootprom mode.
2. Issue the following command to change the output resolution: setenv
output-device screen:r1024x768x70
3. Issue the boot command to reboot the server.
You can also contact your Raritan representative to purchase a video
output adapter:
If you have: Use this video output adapter:
Sun 13W3 with composite
sync output APSSUN II Guardian converter
Sun HD15 with composite
sync output 1396C converter to convert from
HD15 to 13W3 and an APSSUN II
Guardian converter to support
composite sync
Sun HD15 with separate sync
output APKMSUN Guardian converter
Note: Some of the standard Sun background screens may not center
precisely on certain Sun servers with dark borders. Use another
background or place a light colored icon in the upper left hand corner.
Mouse Settings
To configure the mouse settings (Sun Solaris 10.1):
1. Choose Launcher. Application Manager - Desktop Controls opens.