Raritan Computer DKX2-V2.3.5-0N-E - Manual (Page 190)

Chapter 8: Device Management
181
To delete a port group:
1. Click on the Port Group Management page, select the checkbox of
the port group you want to delete.
2. Click the Delete button.
3. Click OK on the warning message.
Supported Blade Chassis Models
This table contains the blade chassis models that are supported by the
KX II and the corresponding profiles that should be selected per chassis
model when configuring them in the KX II application. A list of these
models can be selected on the Port Configuration page from the Blade
Server Chassis Model drop-down, which appears when the Blade
Chassis radio button is selected. For details on how to configure each
blade chassis model, see their corresponding topics in this section of the
help.
Blade chassis model KX II Profile
Dell ® PowerEdge ™
1855/1955
Dell PowerEdge 1855/1955
Dell PowerEdge M1000e Dell PowerEdge M1000e
IBM ® BladeCenter ® S IBM (Other)
IBM BladeCenter H IBM BladeCenter H
IBM BladeCenter T IBM (Other)
IBM BladeCenter HT IBM (Other)
IBM BladeCenter E IBM BladeCenter E
HP ® Configure using Port Group
Management functions. See
HP Blade
Chassis Configuration (Port Group
Management)
(on page 179).