Raritan Computer DKX2-V2.3.5-0N-E User Manual
Page 20
Chapter 1: Introduction
11
Diagram Key
TCP/IP
IPv4 and/or IPv6
KVM (Keyboard, Video, Mouse)
UTP Cable (Cat5/5e/6)
KX II
Local Access Console
Local User - an optional user console (consisting of a
keyboard, mouse, and multi-sync VGA monitor)
attached directly to the KX II to control KVM target
servers (directly at the rack, not through the network).
A USB smart card reader can also be attached at the
Local port to mount onto a target server. An extended
local port is also provided on the DKX2-832 and
DKX2-864 models.
Remote PC
Networked computers used to access and control KVM
target servers connected to the KX II. A USB smart
card reader can also be attached to the remote PC and
attached to a target server via the KX II.
CIMS
Dongles that connect to each target server or rack PDU
(power strip). Available for all of the supported
operating systems.
Target Servers
KVM Target Servers - servers with video cards and
user interfaces (for example, Windows
®
operating
system
®
, Linux
®
, Solaris
™
, etc.) accessed remotely via
the KX II.
Dominion PX Rack PDU (Power Strips)
Raritan rack PDUs accessed remotely via the KX II.
See Supported CIMs and Operating Systems (Target Servers) for a
list of the supported operating systems and CIMs, and see
Supported
Operating Systems (Clients)
(on page 260) for a list of the operating
systems supported by the KX II remotely.