Raritan Computer DKX2-V2.3.5-0N-E - Manual (Page 125)

Chapter 7: User Management
116
Power control access
Option Description
Deny Deny power control to the target server
Access Full permission to power control on a target server
For blade chassis, the port access permission will control access to the
URLs that have been configured for that blade chassis. The options are
Deny or Control. In addition, each blade housed within the chassis has
its own independent Port Permissions setting.
If you are using a tiered configuration in which a base KX II device is
used to access multiple other tiered devices, the tiered device enforces
individual port control levels. See
Configuring and Enabling Tiering
(on page 142) for more information on tiering.
Setting Permissions for an Individual Group
To set permissions for an individual user group:
1. Locate the group from among the groups listed. Individual groups
can be identified by the @ in the Group Name.
2. Click the Group Name. The Group page opens.
3. Select the appropriate permissions.
4. Click OK.
Note: See Alternate RADIUS Authentication Settings for information on
additional settings if you are using Alternate RADIUS Authentication.
Group-Based IP ACL (Access Control List)
Important: Exercise caution when using group-based IP access
control. It is possible to be locked out of your KX II if your IP
address is within a range that has been denied access.
This feature limits access to the KX II device by users in the selected
group to specific IP addresses. This feature applies only to users
belonging to a specific group, unlike the IP Access Control List feature
that applies to all access attempts to the device, is processed first, and
takes priority.
Important: The IP address 127.0.0.1 is used by the KX II Local Port
and cannot be blocked.