Raritan Computer DKX2-V2.3.5-0N-E - Manual (Page 265)

Chapter 13: KX II Local Console
256
 Timeout (seconds)
1. Click Reset to continue. You will be prompted to confirm the factory
reset because all network settings will be permanently lost.
2. Click OK button proceed. Upon completion, the KX II device is
automatically restarted.
Resetting the KX II Using the Reset Button
On the back panel of the device, there is a Reset button. It is recessed to
prevent accidental resets (you will need a pointed object to press this
button).
The actions that are performed when the Reset button is pressed are
defined in the graphical user interface. See Encryption & Share.
Note: It is recommended that you save the audit log prior to performing a
factory reset. The audit log is deleted when a factory reset is performed
and the reset event is not logged on the audit log. For more information
about saving the audit log, see Audit Log.
To reset the device:
1. Power off the KX II.
2. Use a pointed object to press and hold the Reset button.
3. While continuing to hold the Reset button, power the KX II device
back on.
4. Continue holding the Reset button for 10 seconds. Once the device
has been reset, two short beeps signal its completion.