Raritan Computer DKX2-V2.3.5-0N-E - Manual (Page 175)

Chapter 8: Device Management
166
Removing Power Associations
When disconnecting target servers and/or rack PDUs from KXII, all
power associations should first be deleted. When a target has been
associated with a rack PDU and the target is removed from the KX II, the
power association remains. When this occurs, you are not able to access
the Port Configuration for that disconnected target server in Device
Settings so that the power association can be properly remove.
To remove a rack PDU association:
1. Select the appropriate rack PDU from the Power Strip Name
drop-down list.
2. For that rack PDU, select the appropriate outlet from the Outlet
Name drop-down list.
3. From the Outlet Name drop-down list, select None.
4. Click OK. That rack PDU/outlet association is removed and a
confirmation message is displayed.
To remove a rack PDU association if the rack PDU has been
removed from the target:
1. Click Device Settings > Port Configuration and then click on the
active target.
2. Associate the active target to the disconnected power port. This will
break the disconnected target's power association.
3. Finally, associate the active target to the correct power port.