Nortel Networks SRG 50 NN43001-307 - Manual (Page 9)

9
New in this release
The CS 1000 Main Office Configuration for SRG50 (NN43001-307) for CS
1000 Release 5.0 includes support for SRG 50 Release 3.0.
The following sections detail what is new in CS 1000 Main Office
Configuration for SRG50 (NN43001-307) for CS 1000 Release 5.0 .
Other
CS 1000 Main Office Configuration for SRG50 (NN43001-307) includes
the following changes:
• Replaced instances of OTM 2.2 with TM 3.1.
• Updated Element Manager with enhancements.
• Added support for new IP Phones.
• Removed instances of CS 1000S and Small Systems.
• Removed instances of Terminal Numbers (TN) in "c u" format. Only TN
in "l s c u" format are supported.
Subject
This document describes the CS 1000 Main Office Configuration for
SRG50 (NN43001-307) for software Release 3.0 for CS 1000 Release 5.0.
Information in this document complements information found in documents
in the Communication Server 1000 documentation suite. For information
about how to configure the SRG 50, see SRG50 Configuration Guide
(NN40140-500) at
www.nortel.com . Select Support & Training > Technical
Documentation > Communication Servers > BCM.
Intended audiences
This document is intended for individuals responsible for configuring the
main office for Survivable Remote Gateway for organizations using CS
1000 systems.
Related information
This section lists information sources that relate to this document.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.