Nortel Networks SRG 50 NN43001-307 - Manual (Page 200)

200 Emergency Services configuration
LD 90
Prompt Response Description
REQ NEW CHG Add, Change
CUST xx Customer number as defined in LD 15
FEAT NET Network translation tables
TRAN aaa
TYPE SPN
- SPN 911 AC + ESDN is recognized as an Emergency Service Access call.
112 Use the number configured for ESDN.
- RLI xxx Route List Index.
Use Route List Index configured in LD 86.
—End—
Procedure 16
Configuring the branch office zone
Step Action
1 Configure the branch office zone on the branch office.
In the branch office, only the zone number and bandwidth/codec
selection is configured.
Use the same zone number between the branch office and main
office. The main office configuration (
Procedure 15 "Configuring the
main office" (page 195) , step 6) provides the branch office zone
characteristics (local time, local dialing, and ESA).
2 Configure the routing tables on the SRG.
The SRG must recognize the incoming digits on the Virtual Trunk and
remove all but the ESDN. The call is routed to a local termination.
—End—
Emergency Services for Virtual Office
The E911 Virtual Office feature allows Virtual Office users, whether they are
logged in or logged out of Virtual Office to place an emergency (E911) call
to the correct Public Safety Answering Point (PSAP) for their geographical
location.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.