Network using coordinated dialing plan – Nortel Networks SRG 50 NN43001-307 User Manual
Page 154
154
Bandwidth Management
Figure 60
Call to remote branch office on the destination side
1. The main office B deletes the HLOC, and determines that this is to a
local branch office. The system transmits 3456 to the NRS. The NRS
checks its provisioning, and determines that for this CDP region this call
goes to branch office B1.
2. The main office sends the call to 3456 to the branch office. The branch
office rings set 3456.
Network using Coordinated Dialing Plan
The following section provides general details of network setup.
Figure 61 "Full CDP network" (page 155)
shows a full CDP network
configuration.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307
02.02
Standard
Release 5.0
3 December 2007
Copyright © 2005-2007, Nortel Networks
.