Nortel Networks SRG 50 NN43001-307 User Manual

Page 112

112

Bandwidth Management

Figure 34
Call Progress with Adaptive Network Bandwidth Management

Zone bandwidth management and Adaptive Network Bandwidth
Management

Using Element Manager or the Command Line Interface (CLI), previously
configured zones (except Zone 0) can have the Adaptive Network Bandwidth
Management feature turned on or off. Once turned on, alarm threshold
levels and the QoS coefficients can be adjusted from the default values.
Adaptive Network Bandwidth Management cannot be enabled for Zone 0.

When Adaptive Network Bandwidth Management is enabled for a particular
zone on the Call Server, the zone appears in the zone table. The zone table
can be displayed using Element Manager or LD 117. When a call is made
from the configured zone to another zone, the bandwidth used appears in
the zone table.

Nortel Communication Server 1000

Main Office Configuration Guide for SRG 50

NN43001-307

02.02

Standard

Release 5.0

3 December 2007