Nortel Networks SRG 50 NN43001-307 User Manual
Page 35
Zone parameters
35
Table 6
Configure Customer Data Home Location Code and Virtual Private Network Identifier
Prompt
Response
Description
REQ:
CHG
Changing existing data
TYPE:
NET
ISDN and ESN Networking options
CUST
Customer number
0-99
Range for Large Systems
…
…
…
CLID
YES
Allow Calling Line Identification option
-ENTRY
xx
CLID entry to be configured
--HLOC
100-9999999
Home Location code (ESN) (3-7 digits)
ISDN
YES
Integrated Services Digital Network
-VPNI
(0)-16383
Virtual Private Network Identifier for Bandwidth
Management feature
X = Disables feature
1-16383 = Enables feature
2
Configure the zone properties for IP Telephony bandwidth
management. Use LD 117 or Element Manager. See IP Peer
Networking Installation and Commissioning (NN43001-313).
The branch office zone number and zone bandwidth management
parameters at the main office must match the corresponding branch
office zone number and zone bandwidth management parameters
at the branch office.
ATTENTION
Zone 0, the default zone, must not be configured as a branch office zone.
Network Bandwidth Management does not support zone 0. If zone 0 is
configured as an branch office zone, the Bandwidth Management feature
is not activated.
3
Define the zone parameters for the branch office. Use LD 117
or Element Manager. See IP Peer Networking Installation and
Commissioning (NN43001-313).
LD 117 Define zone parameters for the branch office
Command
Description
CHG ZBRN
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307
02.02
Standard
Release 5.0
3 December 2007
Copyright © 2005-2007, Nortel Networks
.