Nortel Networks SRG 50 NN43001-307 - Manual (Page 104)

104 Bandwidth Management
— Intrazone Preferred Strategy = Best Quality (BQ)
— Intrazone Bandwidth = default (1000000)
— Interzone Preferred Strategy = Best Bandwidth (BB)
— Interzone Bandwidth = maximum bandwidth usage allowed
between peer Call Servers
• Call Server zones that will be used for Virtual Trunks with the
following properties:
— Intrazone Preferred Strategy = Best Quality (BQ)
— Intrazone Bandwidth = default (1000000)
— Interzone Preferred Strategy = Best Quality (BQ)
— Interzone Bandwidth = default (1000000)
3 Configure the IP Phone, DSP and Virtual Trunk data with the
corresponding zone numbers.
For example, for an IP Phone 2004 telephone in zone 8:
LD 11
REQ NEW
TYPE 2004
...
ZONE 8
...
—End—
Configuration using CS 1000 Element Manager
Zones are configured from the Zones web page, shown in Figure 30 "Zones
web" (page 105) .
See "Configuring zone parameters using CS 1000 Element Manager" (page
36) for instructions on configuring a Network Bandwidth Management zone,
using the values given on "Configuring Bandwidth Management" (page 103) .
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.