Nortel Networks SRG 50 NN43001-307 - Manual (Page 124)

124 Bandwidth Management
Maintenance using Element Manager
The CAC parameters, intrazone statistics, and interzone statistics for one
of more zones are available in Element Manager from the Zones web
page, shown in
Figure 30 "Zones web" (page 105) . To view the intrazone
or interzone statistics, use Procedure 7 "Printing intrazone and interzone
statistics for a zone" (page 106) . To display the CAC parameters, follow the
steps in Procedure 8 "Displaying CAC parameters for one or more zones"
(page 124) .
Procedure 8
Displaying CAC parameters for one or more zones
Step Action
1 Select IP Network > Zones from the navigator.
The Zones web page opens (see Figure 30 "Zones web" (page
105) ).
2 Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page appears,
as shown in
Figure 31 "Maintenance Commands for Zones web
page" (page 107) . This page lists all the configured zones and their
intrazone statistics by default.
3 Select Print Adaptive Network Bandwidth Management and CAC
Parameters (PRT ZCAC) from the Action drop-down list.
4 Select a zone from the Zone Number drop-down list, by doing one
of the following:
• Select ALL to print statistics for all zones.
• Select a specific zone number to display statistics for a specific
zone.
5 Click Submit.
The Maintenance Commands for Zones web page reopens,
displaying the statistics for the specified zone or zones. A blank
field indicates that statistic is either not available or not applicable to
that zone.
Figure 39 "Element Manager CAC parameters" (page 125) shows
an example of the CAC parameters.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.