Figure 4 – Nortel Networks SRG 50 NN43001-307 User Manual

Page 38

Setting up the main office

Figure 4
Zone Time Difference and Time web page

Zone parameters must be configured on the main office and the branch
office. For information on configuring zones, see

Branch office IP Phone configuration at the main office

After the branch office zones and passwords are provisioned, provision the
branch office IP Phones at the main office. These can be provisioned using
Telephony Manager 3.1. See

"Branch office IP Phone configuration using

Telephony Manager 3.1" (page 38)

or LD 11. See

Procedure 2 "Configuring

branch office IP Phones at the main office using LD 11" (page 39)

ATTENTION

There is no automatic data synchronization between the main office Call Server
and SRG. The technician must provision the telephone on both the Call Server
and the SRG.

Branch office IP Phone configuration using Telephony Manager 3.1

At the main office, Telephony Manager 3.1 can be used to configure branch
office IP Phones. Use Telephone Pages to configure the telephones to
include the following:

•

Terminal Type

•

Nortel Communication Server 1000

Main Office Configuration Guide for SRG 50

NN43001-307

02.02

Standard

Release 5.0

3 December 2007