Nortel Networks SRG 50 NN43001-307 - Manual (Page 199)

Emergency Services Access 199
LD 86
Prompt Response Description
REQ NEW CHG Add, Change
CUST xx Customer number as defined in LD 15
FEAT DGT Digit Manipulation
… … …
DMI 1- 999
Digit Manipulation Table numbers.
ATTENTION
Do not use Digit Manipulation Table 0, as it results in the
incorrect call termination treatment.
b. Configure the system to trap the ESDN within the AC1 and AC2
translation tables to reprocess the ESDN locally.
LD 86 Configure the system to trap the ESDN and reprocess it locally
Prompt Response Description
REQ NEW CHG Add, Change
CUST xx Customer number as defined in LD 15
FEAT RLB Route List Block
… … …
RLI xxx Route List Index to be accessed
ENTR xxx Entry number for NARS/BARS Route List
LTER YES Local Termination entry. This allows the AC + ESDN call to be
recognized as an Emergency Services Access call.
DMI 1 - 999
Digit Manipulation Table.
Use the table configured in LD 86. This allows the digits after
the AC to remain in the call register as a called number.
ATTENTION
Do not use Digit Manipulation Table 0, as it results in the
incorrect call termination treatment.
c. Configure Emergency Service Access call recognition for AC +
ESDN dialing in LD 90.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.