Feature packaging – Nortel Networks SRG 50 NN43001-307 User Manual
Page 176
176
Alternative Call Routing for Network Bandwidth Management
Network Routing Service (NRS)
Both the main office and branch office must be registered on the Nortel NRS
for tandem routing to work for main office to branch office tandeming.
Trunk Route Optimization (TRO)
Disable Trunk Route Optimization between the branch office (or SRG) and
the main office in order to allow the tandeming required for the feature to
work.
Virtual Office
It is not possible to determine the real Bandwidth Zone of a telephone
logged in as a Virtual Office telephone.
Feature packaging
The Alternative Call Routing for NBWM feature requires the following
software package:
•
Coordinated Dialing Plan (CDP) package 59
The following software package is optional:
•
Flexible Numbering Plan (FNP) package 160
Feature implementation using Command Line Interface
Task summary list
The following is a summary of the tasks in this section:
1.
Enable Alternative Call Routing for NBWM for a particular zone
2.
Configure Alternate Prefix number for a particular zone and the All Calls
option, if desired.
3.
Print Alternate Prefix number for a particular zone.
LD 117
Command
Description
ENL ZALT
Enable Alternative Call Routing for NBWM, where:
Input zone number (0-255).
Configure the branch office zone using LD 117 at the main
office.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307
02.02
Standard
Release 5.0
3 December 2007
Copyright © 2005-2007, Nortel Networks
.