Nortel Networks SRG 50 NN43001-307 - Manual (Page 148)

148 Bandwidth Management
7 Provision the main office and branch office with a home location
code (HLOC) or multiple codes to terminate all calls that should
terminate on this system.
Table 14 " Main office B and branch office B" (page 148) lists main
office and branch office HLOC provisioning.
Table 14
Main office B and branch office B
Create a DMI Create an HLOC
LD 86 LD 90
REQ new REQ new
CUST 0 CUST 0
FEAT dgt FEAT net
DMI 61 TRAN ac1
DEL 3 TYPE hloc
ISPN no HLOC 841
DMI 61
Repeat the above for all the main offices and branch offices.
8 Provision the main office to send all other LOC to the IP network
without prefixes. These are going to a remote main office.
Table 15 "Main office B LOC provisioning for LOC to remote main
office system " (page 148)
lists main office B LOC provisioning for
LOC to remote main office. The Main Office A is LOC 842.
Table 15
Main office B LOC provisioning for LOC to remote main office system
Create an RLI Create a LOC
LD 86 LD 90
REQ new REQ NEW
CUST 0 CUST 0
FEAT rlb FEAT NET
RLI 51 TRAN AC1
ENTR 0 TYPE LOC
LTER no LOC 842
ROUT 71 FLEN 7
RLI 51
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.