Procedure 13, Enabling behavior at a zone – Nortel Networks SRG 50 NN43001-307 User Manual
Page 185
Maintenance
185
Command
Description
ENL ZBR
not input features, then all are enabled.
DIS ZBR [ALL] [LOC][ESA][TIM][ALT] Disable features for the branch office zone. If you do not
input features, then all are disabled.
The system responds with ok, if operation is successful.
LD 117 Change and Print Zone Alarm Suppression Time Interval
Command
Description
CHG ZAST
Change Suppression Time Interval for QoS alarms related
to Alternative Call Routing for NBWM feature for zone
specified. Time Interval is measured in seconds from the
time the last alarm was printed.
Default is 0. Range is 0 - 3600 seconds.
PRT ZAST
Print Suppression Time Interval for QoS alarms related
to Alternative Call Routing for NBWM feature for zone
specified. No entry for zone number results in printout for
all zones.
Sample printout:
#
Alarms Suppression Time
10
50
11
0
12
1000
Where # is the column header for zone number.
Element Manager maintenance
Enable branch office behavior for a zone
You can configure the Alternative Call Routing for NBWM feature while you
configure the zone’s branch office behavior.
Procedure 13
Enabling behavior at a zone
Step
Action
1
From the navigator, click System > Maintenance. The Maintenance
web page appears. See
Figure 74 "Maintenance web page" (page
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307
02.02
Standard
Release 5.0
3 December 2007
Copyright © 2005-2007, Nortel Networks
.