Nortel Networks SRG 50 NN43001-307 - Manual (Page 119)

Adaptive Network Bandwidth Management 119
Table 9
Adaptive Network Bandwidth Management and CAC fields
Field Title Field Definition
LD 117
equivalents
Enable Call Admission
Control Feature (CAC) Control the CAC feature for the zone
• Enable (check box selected)
• disable (clear the check box)
ENL ZCAC
DIS ZCAC
QoS Response Time
Increase (ZQRT) Bandwidth limit increment, as a percentage of
the QoS factor for the zone CHG ZQRT
QoS Response Time
Interval (ZQRTI) Time (in minutes) between bandwidth limit
increments CHG ZQRTI
Warning Alarm Threshold
(ZQWAT) A QoS value, which is lower than this value, but
higher than the Critical (Unacceptable) Alarm
Threshold, triggers a Major Alarm. CHG ZQWAT
Critical Alarm Threshold
(ZQUAT) A QoS value, which is lower than this value,
triggers an Unacceptable (Critical) Alarm. CHG ZQUAT
R Alarm Coefficient (CR) The R (Cr) coefficient is used to calculate the
QoS value for the zone. CHG CR
Packet Loss Alarm
Coefficient (CPL) The Packet Loss (Cpl) coefficient is used to
calculate the QoS value for the zone. CHG CPL
Delay Alarm Coefficient
(CD) The Delay (Cd) coefficient is used to calculate
the QoS value for the zone. CHG CD
Jitter Alarm Coefficient (CJ) The Jitter (Cj) coefficient is used to calculate the
QoS value for the zone. CHG CJ
Coefficient of QoS (CQoS) The Coefficient of QoS (CQoS) is used to
calculate the overall QoS value for the zone. CHG CQOS
Recent Validity Time Interval
(CACVT) Amount of time (in hours) for zone-to-zone record
validity. Once this interval expires, records for
unused zones are purged from the tables. CHG CACVT
Configuration using Command Line Interface
You can also configure the Adaptive Network Bandwidth Management
feature using LD 117.
LD 117 Configure Adaptive Network Bandwidth Management
Command Description
CHG CACVT
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.