Nortel Networks SRG 50 NN43001-307 - Manual (Page 36)

36 Setting up the main office
Command Description
Define a zone as a branch office zone.
CHG ZDST
If the branch office observes Daylight Savings Time (DST), these parameters
specify the start and end of DST. During DST, the clock automatically advances
one hour forward.
CHG ZTDF
Specified in minutes, the time difference between main office and branch office
when both are not in DST.
CHG ZDES
A name to render data display more meaningful.
4 Enable the features for the branch office zone in LD 11.
LD 117 Enable features for an SRG zone
Command Description
ENL ZBR ALL Enables features for branch office .
—End—
Configuring zone parameters using CS 1000 Element Manager
Use Element Manager to configure the branch office specific zone
properties and time difference.
1. Select IP Network > Zones in Element Manager navigator.
The Zones window opens. See Figure 2 "Zone List web page" (page
36) . The zone list is the main window used for zone configuration.
Figure 2
Zone List web page
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.