Nortel Networks 6300 - Manual (Page 78)

Remote Annex 6300 Hardware Installation Guide
Chapter 3 ROM Monitor Commands
3-20
ipx
This release does not support this command.
The ipx command sets several parameters associated with IPX
booting and dumping. This is useful when loading the Remote Annex
6300’s operational image from a Novell file server. The syntax is:
ipx [–d]
The ipx command display looks like this:
The ipx –d command displays the current settings for all of the entries.
The command display looks like this:
monitor:: ipx
Enter IPX file server name []:: mars
Enter Frame type, 0=802.3 1=Ethernet II 2=802.2 3=SNAP\
[802.3]::
Enter IPX dump user name []:: susans
Enter IPX dump password []:: ******
Verify IPX dump password []:: ******
Enter IPX dump path []:: SYS:\user\susans\
monitor:: ipx –d
IPX preferred load file server: “MARS”
IPX frame type: "802.3"
IPX dump user name: “SUSANS”
IPX dump password:
IPX dump path name: “SYS:\user\susans\”