Attaching the mounting bracket and device to the r, 1 position the remote annex horizontally, facing f, 2 align the holes in the mounting bracket with the – Nortel Networks 6300 User Manual
Page 40: 3 insert the mounting screws and tighten the screw, Figure 2-2 . attaching the mounting bracket and de, Rear mount, Rear mount -4, Attach the mounting bracket to the rack as follows
Remote Annex 6300 Hardware Installation Guide
Chapter 2
Installing the Remote Annex 6300
2-4
Attaching the Mounting Bracket and Device to the Rack
Attach the mounting bracket to the rack as follows:
1
Position the Remote Annex horizontally, facing forward in the rack.
2
Align the holes in the mounting bracket with the holes in the rack.
3
Insert the mounting screws and tighten the screws to attach the front
of the Remote Annex 6300 to the front rack (see
).
Figure 2-2. Attaching the Mounting Bracket and Device to the Rack
Rear Mount
The Remote Annex 6300 is mounted to the rear of the rack by attaching
the rear mounting brackets to the device and then attaching the device
and mounting brackets to the rack.
Bay Networks
Remote Annex 6300
Xylogics, a Bay Networks Company
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
Modem Status
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CD
Tx/Rx
13-16 9-12
5-8
1-4
29-32 25-28 21-24 17-20
Modem Config
Status
Test Sync Los
Red
Yel
Blu
Stat
Traf
Setup
Reset
Power
Attn
Network/Status
Ararms
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
PRI Channel Status