Configuring gateway endpoints – Nortel Networks 5100 User Manual
Page 98
98
NRS configuration
7
Click Save.
The L0 Domains page appears again, showing the added domain.
8
To view the configured data, in the L0 domain page, select the
service domain and L1 domain and click Show.
A list of configured L0 domains appears.
9
Select the L0 domain to view its configuration information.
The View L0 Domain Property page appears. See
.
—End—
Configuring Gateway endpoints
Add an endpoint for both the Communication Server 1000 and Multimedia
Communication Server 5100 (MCS 5100).
These are Gateway endpoints, which can be served by several users. You
can add multiple endpoints, some SIP-only, some H.323-only, and Unistim.
You can also configure a user endpoint, which can be only one of these
three protocols.
Configuring Gateway endpoints
Step
Action
1
Log on to NRS Manager.
2
Select the Configuration tab
3
Click Standby DB View to switch from active to standby database
view.
4
Click Gateway Endpoints.
5
Click Add.
The View Gateway Endpoint Property page appears. See
"View Gateway Endpoint Property" (page 99)
.
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301
01.01
Standard
Release 4.5
27 October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.