Nortel Networks 5100 - Manual (Page 51)

IP Peer Networking configuration 51
The new Route List Block is generated. You can check the
configuration by selecting Route List Block Index and Data Entry
Index.
—End—
Creating the CDP steering codes (LD 87)
Perform the following procedure to create the CDP steering codes.
Creating the CDP steering codes (LD 87)
Step Action
1 Log on to Element Manager.
2 Select Dialing and Numbering Plans > Electronic Switched
Network.
3 Expand the Customer heading.
See
Figure 17 "Electronic Switched Network (ESN)" (page 47) .
4 Select Coordinated Dialing Plan (CDP) > Distant Steering Code
List.
5 Enter the Distant Steering Code (DSC).
This is the DN range of other systems on the network. You can add
more steering codes in this manner.
6 Click to Add.
The Distant Steering Code page appears. See
Figure 20 "Distant
Steering Code" (page 52) .
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.