Nortel Networks 5100 - Manual (Page 67)

Call Server configuration 67
Configuring Converged Desktop users (LDs 10/11)
Perform the following procedure to configure Converged Desktop users.
Configuring Converged Desktop users (LDs 10/11)
Step Action
1 Connect to the Call Server.
2 To program analog (500/2500-type) telephones, enter LD 10.
3 To program digital telephones or IP Phones, enter LD 11.
4 Enter the appropriate values as described in the following table.
For prompts not listed in the following table, press Enter to accept
the default.
—End—
Table 10
LDs 10/11 — Converged Desktop users
Prompt Response Description
REQ NEW
CHG
Add new data
Change existing data
TYPE a..a Type of data block
TN l s c u
c u PCA Terminal Number for sets
Format for Large Systems and CS
1000E systems, where l = loop, s =
shelf, c = card, u = unit
Format for Small Systems, CS1000S
systems, Media Gateway 1000B
systems, and Media Gateway 1000T
systems, where c = card, u = unit
CUST xx Customer number as defined in LD 15
ZONE yy Zone for IP Phones
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.