Nortel Networks 5100 - Manual (Page 61)

Call Server configuration 61
Configuring Personal Call Assistant (LD 11)
Step Action
1 Connect to the Call Server.
2 Enter LD 11.
3 Enter the appropriate values as described in the following table.
For prompts not listed in the following table, press Enter to accept
the default.
—End—
Table 8
LD 11 — PCA
Prompt Response Description
REQ NEW Add a new data block to the system
TYPE PCA Personal Call Assistant
TN l s c u
c u PCA Terminal Number
For Large Systems and CS 1000E
systems, where l = loop, s = shelf, c =
card, u = unit
For Small Systems, CS 1000S systems,
Media Gateway 1000B systems, and
Media Gateway 1000T systems, where
c = card, u = unit
DES aaaaaa Description of PCA Terminal Number
CUST xx Customer number as defined in LD 15
ZONE xx Zone number for IP Phones
CLS UNR Unrestricted Class of Service
KEY 0 ACD yyyy cccc zzzz
2 MCN yyyy
Telephone function key assignments
Automatic Call distribution (ACD) key,
where:
yyyy = ACD DN configured in LD 23 for
Converged Desktop use
ccc = CLID table entry of (0)–N, where N
= the value entered at the SIZE prompt
of LD 15 minus 1
zzzz = agent’s position ID (zzzz can
be up to 4 digits; up to 7 digits with
Directory Number Expansion [DNXP]
package 150)
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.