NEC NEAX 2000 IPS - Manual (Page 60)

NEAX 2000 IPS Configuration Guide
Page 50 NDA-24347, Issue 1
Application Processor (AP) Cards Chapter 4 Circuit Cards
AP00
SPN-AP00B MRC-C (AP)
PN-AP00-B
SC-3005 IXS AP00 PROG-D1 151229 2
Application Package
• For SMDR/PMS/ Hotel Printer/CCIS
Centralized SMDR
• Default data supported.
EXMEM
Note
PZ-M537 151486 0
Expansion Memory
• For AP00-B
• FROM x 4 MB, RAM x 2 MB)
4RST
SPN-4RSTB-B (AP)
SC-2125 SHS MFC PROG-CB
151207 4
4-circuit MF Receiver
• For T1 MF ANI
SPN-4RSTB-911 (AP)
SC-2284 SHS MFC PROG-CD
151215 4
4-circuit MF Receiver
• For Enhanced 911
Caller ID
Class SPN-4RSTC (AP)
SC-2254 SHS CIR PROG-UA
151267 4
4-circuit ID Number Received
• For Caller ID
IPT
SPN-IPTB-A (AP)
SC-2914 IXS IPT PROG-B2
150132 0
IP Trunk
• For CCIS (Point-to-Multipoint)
(In case of G.729a payload 40
milliseconds: four VCT per card,
maximum 16 channels per card)
• One card per PIM
• Eight cards (maximum 127 channels) per
system
• For connection with NEAX 2000
IVS
2
/NEAX 2400 IMX (without
Peer-to-Peer connection)
SPN-IPTB-B (AP)
SC-2968 IXS IPT PROG-C1
150135 0
IP Trunk
• For VoIP (H.323)
(In case of G.729a payload 40
milliseconds: three VCT per card,
maximum 12 channels per card)
• One card per PIM
• Eight cards (maximum 96 channels) per
system
CFT
SPN-CFTC (AP)
SC-2883 IXS CFT PROG-A1 (A)
150125 32
32-party Conference Trunk
• One card per system
Table 4-4 Application Processor (AP) Cards (Continued)
ABBR. NAME CODE
PART
NUMBER
PORT REMARKS