NEC NEAX 2000 IPS - Manual (Page 29)

Chapter 2 System Configuration Mounting VCT Card
NEAX 2000 IPS Configuration Guide
NDA-24347, Issue 1
Page 19
Mounting VCT Card
1. Set the card number to each VCT (PN-16VCTA) card by SW 1 setting, and
confirm the correct switch settings.
2. Mount the first VCT (VCT 0) card in the LT slots, next to the IP-PAD card
mounted in the previous procedure.
3. Mount the second VCT (VCT 1) card in the LT slots, next to the VCT 0 card.
Figure 2-10 Mounting VCT Card
Note 1:
This slot must be vacant except for the IP-PAD card.
Note 2:
Do not mount any other L/T cards in the LT08-LT11 slots when you mount the
VCT card in the LT06 and LT07 slots.
IP-PAD IP-PAD L/T must not
be mounted
Note Note Note Note
IP-PAD IP-PAD
PIM 0 - 7
PF
T MP12/FP12 LT
11 LT
1
0
LT
0
9
LT
0
8
LT
0
7
LT
0
6
LT
0
5
LT
0
4
LT
0
3
LT
0
2
LT
0
1
LT
0
0
VM
V
C
T V
C
T V
C
T
V
C
T
VCT VCT
1 1 1 1