Nortel Networks COOLPIX S1100PJ - Manual (Page 71)

57
Adjusting the A (Auto) Mode setting
More on
Sh
ooting
E ISO Sensitivity
The higher the sensitivity, the less light is needed to expose an image, allowing
capturing darker subjects.
Also, a higher sensitivity allows higher shutter speeds, resulting in the picture with
less camera shake and subject blur in comparison to the same subject taken under
the same brightness.
• Although high ISO sensitivity settings are suited to pictures of subjects taken
under dim lighting, those taken without flash, or those taken at telephoto
setting, high sensitivity settings are often associated with “noise”- randomly
spaced, brightly colored pixels- concentrated in dark portions of images.
B
Notes on ISO Sensitivity
• There are functions with which this setting cannot be enabled. See “Camera Settings that Cannot
Be Applied Simultaneously” ( A 77) for more information.
• When the ISO sensitivity setting is set to any option other than Auto, motion detection (A 51) is
disabled.
B
Notes on ISO Sensitivity 3200 and 6400
• When ISO sensitivity is set to 3200 or 6400, Image mode settings are limited to M
2048×1536, N 1024×768, and O 640×480.
• When ISO sensitivity is set to 3200 or 6400, the image mode icon is displayed in red during
shooting.
A (auto) M Tap the bottom tab M E ISO sensitivity
s
Auto (default setting)
Sensitivity is ISO 80 under normal conditions; when lighting is poor, the camera
compensates by raising sensitivity to a maximum of ISO 800.
Fixed range auto
Choose the range in which the camera automatically adjusts ISO sensitivity, from
ISO 80-200 or ISO 80-400. The camera will not increase sensitivity beyond the
maximum value in the selected range. Set the maximum value for ISO sensitivity for
effective control over the amount of “grain” that appears in images.
80, 100, 200, 400, 800, 1600, 3200, 6400
Sensitivity is locked at the specified value.