Nortel Networks COOLPIX S1100PJ - Manual (Page 69)

55
Adjusting the A (Auto) Mode setting
More on
Sh
ooting
s Subject Tracking (Focusing on a Moving Subject)
In A (auto) mode (
A 52), the touch shooting setting can be changed from
Touch shutter (default setting) to Subject tracking. Use this option to take
pictures of moving subjects. Tap the subject on which the camera will focus. The
focus area will automatically move to track the subject.
1
Tap
s (Subject tracking).
s (subject tracking) is enabled only in A (auto) mode.
2
Register a subject.
Tap the desired tracking subject in the monitor.
- The subject is registered.
- When the border framing the subject glows red, the
camera is unable to focus. Change the composition
and try again.
If the tapped area does not contain a subject that can be registered,
X is displayed in
the monitor. Tap a subject within
X.
When the subject is registered, a yellow focus area is
displayed around that subject and the camera begins
tracking the subject.
Tap another subject to change a subject to follow.
To cancel the registration of the subject, tap a,
displayed at left in the monitor.
If the camera cannot track the registered subject
anymore, the focus area will disappear and the registration will be canceled. Register the
subject again.
A (auto) M Tap the bottom tab M Touch shooting
Touch shooting
Subject tracking
23 23 23
23 23 23