Inserting the battery – Nortel Networks COOLPIX S1100PJ User Manual
Page 34
20
First Ste
p
s
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.
• Charge the battery before the first use or when the battery is running low
(
1
Open the battery-chamber/memory card slot
cover.
Slide the cover latch to the
Y side (1) and open the
cover(
2).
2
Insert the battery.
Confirm that the battery’s positive (+) and negative (–)
terminals are oriented correctly as shown on the label at
the battery chamber opening, and insert the battery.
Use the battery to push up the orange battery latch in the
direction indicated by the arrow (
1) and fully insert the
battery (
2).
When the battery is fully inserted, the battery latch will
lock it in place.
B
Inserting the Battery
Inserting the battery upside down or backwards could
damage the camera. Be sure to check that the battery is in
the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
Close the cover (
1), and slide the cover latch (2) to the
Z side.