Nortel Networks COOLPIX S1100PJ - Manual (Page 144)

130
Connecting to a TV
Con
n
e
cti
ng t
o
Te
le
vi
sion
s, Comp
u
te
rs
a
n
d
Pr
in
te
rs
Operations with TV Connection
While pictures are displayed full-frame on the TV, the previous or subsequent
picture can be viewed by dragging your finger across the camera monitor.
If the first frame of a movie is displayed, the movie can be played back by tapping
the camera monitor.
• Tap the camera monitor to turn TV display off and display the picture in the
camera monitor. When pictures are displayed in the camera monitor, tap the
controls displayed to operate the camera.
• When the camera is connected to a TV, pictures cannot be displayed as
thumbnails, picture display cannot be enlarged (playback zoom), and pictures
cannot be cropped.
• Pictures will be automatically displayed on the TV in the following situations.
- No operations are performed for a few seconds.
- A slide show is played back.
- A movie is played back.
B
Connecting the Audio/Video Cable
When connecting the audio/video cable, be sure that the camera connector is properly oriented. Do
not use force when connecting the audio/video cable to the camera. When disconnecting the
audio/video cable, do not pull the connector at an angle.
B
Video Mode
Be sure that the camera’s video mode setting conforms to the standard used by your television.
Specify the Video mode setting from Interface option (
A 155) in the setup menu (A 142).