Nortel Networks COOLPIX S1100PJ - Manual (Page 55)

41
Using the Basic Shooting Functions
Bas
ic Ph
otography an
d Pl
ayba
ck
: G
(Easy Auto) Mode
q Tapping the Monitor to Release the Shutter (Touch
Shutter)
Pictures can be taken by simply tapping the monitor.
• Touch shutter is set by default. Proceed to step 3.
1
Tap the bottom tab to display the setting
controls (
A 16) and tap the touch shooting
icon.
2
Tap
q (touch shutter).
Tap J to return to the previous screen.
To hide the setting controls after applying the setting, tap
the tab again.
3
Tap the desired subject to take a picture.
When a face is detected in G (easy auto) mode, it is
framed by a border. Tap a detected face to set the focus
and exposure on that face.
When no face is detected, the camera focuses on the area
that is tapped.
Do not use force when tapping the monitor as this may
cause slight movement of the camera, resulting in
blurred pictures.
When digital zoom is in effect, the camera focuses on the subject in the center of the
frame.
The shutter-release button can also be used when the touch shutter option is selected.
If
X is displayed when the monitor is tapped, the
shutter cannot be released. Tap an area within
X or a
border displayed when the camera detects a face.
OFF OFF OFF 0.0 0.0 0.0
Touch shooting
Touch shutter
23 23 23
23 23 23