Nortel Networks COOLPIX S1100PJ - Manual (Page 170)

156
Setup Menu
Basi
c Came
ra Setup
d Blink Warning
Specify whether or not the camera detects human subjects that have blinked
using the face detection function (
A 50) when shooting in the following modes.
• G (easy auto) mode (A 26) or A (auto) mode (A 52).
• Portrait (A 64) or Night portrait (A 65) is selected for the scene mode.
Tap the bottom tab ( A 143) M Tap z (Setup menu) M d Blink warning
On
When the camera detects that one or more human subjects may have blinked in a
picture taken using the face detection function, the blink warning screen is
displayed in the monitor.
The face of the human subject that may have blinked when the shutter was
released is framed by a yellow border. Should this occur, check the picture and
determine whether or not another picture should be taken.
See “Operating the Blink Warning Screen” (
A 157) for more information.
Off (default setting)
Blink warning is not enabled.