Nortel Networks COOLPIX S1100PJ - Manual (Page 171)

157
Setup Menu
Basi
c Came
ra Setup
Operating the Blink Warning Screen
When the blink warning screen shown at right is
displayed in the monitor, the operations described
below are available.
If no operations are performed within a few seconds,
the camera automatically returns to shooting mode.
B
Note on Blink Warning
The blink warning does not function at continuous settings of Continuous, BSS, or Multi-shot 16.
To Use Description
Enlarge the detected
face that blinked
g (i)
Rotate the zoom control to g (i).
If the camera detects that more than one human
subject blinked, tap M or N to switch display to
another face.
Switch to full-frame
playback
f (h) Rotate the zoom control to f (h).
Delete the picture
E
Tap E.
Switch to shooting
mode
I
Tap the monitor, I, or H. The shutter-release
button can also be pressed to return to shooting
mode.
H
Did someone blink?