Nortel Networks COOLPIX S1100PJ - Manual (Page 21)

7
Parts of the Camera
In
troducti
on
Replacing the Remote Control Battery
Attaching the Camera Strap
1 2 3
Push the tab in the
direction indicated
above. While holding the tab in,
grasp the edge of the
battery holder with your
fingernail and pull it
straight out. Remove the used 3V
CR2025 lithium battery.
4 5
Place a new 3V CR2025
lithium battery in the
battery holder. Be sure
that the “+” mark is
facing up. Insert the battery holder
into the remote control.