Nortel Networks COOLPIX S1100PJ - Manual (Page 64)

50
More on
Sh
ooting
G Easy Auto Mode
Automatic Scene Selection
The camera automatically selects one of the following scenes when pointing the
camera at a subject.
Focusing in Easy Auto Mode
When G or i is displayed, the camera automatically
selects one or more of the nine focus areas containing
the subject closest to the camera. Press the shutter-
release button halfway to activate the focus area. When
the shutter-release button is pressed halfway, the focus
area (up to nine areas) selected by the camera will be
displayed in the monitor.
Face Detection
When the camera is pointed at a human face, face detection, which the camera
automatically detects that face and focus on it, starts. The face detection function
is activated in the following situations.
• In G (easy auto) mode (A 26)
• In A (auto) mode (A 52)
• In Portrait (A 64), or Night portrait (A 65) scene mode
• In smart portrait mode (A 73)
B
Notes on the Face Detection Function
• The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or other obstructions
- When faces take up too much or too little of the frame
• When the frame includes more than one face, the faces detected by the camera and the face on
which the camera focuses depend upon a variety of factors, including the direction in which the
faces are looking.
• In some cases, including those noted in “Autofocus” (A 31), autofocus may not perform as
expected, and the subject may not be in focus despite the fact that the double border glows
green. Should this occur, refocus on another subject positioned at the same distance from the
camera as the actual portrait subject (
A 46).
• G Auto mode (general use)
• e Portrait (A 64)
• f Landscape (A 64)
• g Night landscape (A 67) • h Night portrait (A 65)
• j Backlighting (A 69)
• i Close-up (A 67)
23 23 23