Nortel Networks COOLPIX S1100PJ User Manual
Page 178
164
Displaying Pictures with the Projector (Projector Mode)
U
sin
g th
e pro
je
cto
r
5
Switch the picture with the remote control (supplied).
Point the remote control at the infrared receiver on the front or rear of the camera (
5) within a distance of approximately 5 m (16 ft.).
A 166) for the details of the operation of the remote
control.
6
Press the
P button on the remote control to end projection.
Projection also ends if the
P button or A button on the camera is pressed to switch
to shooting mode.
B
Notes on Using the Projector
• Be sure to read and follow the projector warnings on page iv.
• Be aware that the camera and battery will become hot in projector mode. Allow the camera to
cool before using it again when the projector has been used for an extended period of time.
• When the battery is low, the camera automatically adjusts projection brightness to save power.
Infrared emitter
Infrared receiver
Display the previous picture
Display the next picture