Nortel Networks COOLPIX S1100PJ User Manual

Page 49

Using the Basic Shooting Functions

Bas

ic Ph

otography an

d Pl

ayba

: G
(Easy Auto) Mode

Setting the Flash Mode

Tap the left tab to display the setting controls
(

A 16) and tap the flash mode icon.

Tap the desired flash mode icon.

Tap J to return to the previous screen.

To hide the setting controls after applying the setting, tap
the tab again.

Shooting When the Flash is Disabled (

c) or Lighting is Dim

• Use of a tripod is recommended. Set Vibration reduction (A 150) to Off in the setup menu

(

A 142) when using a tripod to stabilize the camera during shooting.

• The noise reduction function may be activated with some shooting conditions such as dim

lighting. More time than usual is required to record pictures to which noise reduction is applied.

Note on Using the Flash

When using the flash, reflections from dust particles in the air may appear as bright spots in pictures.
To reduce these reflections, set the flash to

c (off).

The Flash Lamp

The flash lamp indicates flash status when the shutter-
release button is pressed halfway.

• On: Flash will fire when picture is taken.
• Blinks: Flash charging. Wait a few seconds and try

again.

• Off: Flash will not fire when picture is taken.
If the battery is low, the monitor display will turn off,
and remain off, until the flash is fully charged.

Flash mode

Auto