Nortel Networks 608(WL) - Manual (Page 72)

Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1 70
Page layout for pre-
shared key
authentication
When you click Use Preshared Key Authentication, the initial page is updated in the
following way:
IKE Authentication with
Preshared Key
When you select Use Preshared Key Authentication, the following fields have to be
completed:
Preshared Secret:
A string to be used as a secret password for the VPN connection. This secret
needs to be identically configured at both peers (local and remote peer).
Confirm Secret:
The Preshared Secret value is not shown in clear text in the SpeedTouch™
Web page. In order to protect from typing errors, you have to type the key
twice, in order to confirm your original entry.
Local ID Type and Local ID:
The Local ID identifies the VPN server during the Phase 1 negotiation with the
remote VPN client. This identity must match the settings in the VPN client in
order to successfully set up the IKE Security Association. The identity types
supported in the SpeedTouch™ are listed in the table below (wildcards not
allowed).
For more information about matching the settings of the built-in VPN client of
the SpeedTouch™, see
“ Server IP Address or FQDN” on page 53 .
Identity type Keyword Examples
IP address addr 10.0.0.1
Fully qualified domain
name
fqdn sales.corporate.net
User fully qualified domain
name
userfqdn [email protected]
Distinguished name dn dc=corpor,uid=user
Key identity keyid myid