Nortel Networks 608(WL) - Manual (Page 25)

Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1 23
3 Configuration via Local Pages
Prerequisites In order to use the VPN features in the SpeedTouch™608(WL)/620, you should
enable the VPN software module.
To activate this VPN module, you have to acquire the optional software activation
key. To check whether the software activation key is present, browse to the
SpeedTouch™ Web pages and go to Expert Mode > SpeedTouch > Add-On. This
page shows which keys are enabled. For more information , see the SpeedTouch™
Operator’s Guide.
IPSec Web Pages All IPSec configurations can be built by means of the SpeedTouch™ local Web
pages.
Application-oriented configuration pages gives you direct access to all relevant
parameters. Getting your IPSec configuration up and running is as easy as selecting
your application and filling out a few Web pages. The application-oriented pages
cover the most common application scenarios.
Additional Web pages are component-oriented and allow to control advanced
settings, such as certificates management and debugging options. The Advanced
Web pages allow you to build an operational IPSec configuration by combining
configuration components in a similar way as the underlying CLI commands.
VPN Menu All IPSec related configuration pages are accessed via Expert Mode > VPN.
LAN to LAN
Access to user-friendly configuration
pages for these specific application
scenarios.
VPN Client
VPN Server
Certificates Access to the Certificate configuration
pages.
Advanced Access to the Advanced configuration
pages, reflecting the commands and
command groups of the CLI.
Debug Debugging pages, allowing you to
diagnose VPN connection problems.