3 set or modify the vpnclient parameters, Modify command, Example – Nortel Networks 608(WL) User Manual
Page 182: Set or modify the vpnclient parameters, Chapter 6
Chapter 6
Advanced Features
E-DOC-CTC-20051017-0169 v0.1
180
6.4.3 Set or modify the vpnclient parameters
modify command
The
ipsec peer vpnclient modify
command sets or modifies the
vpnclient entity parameters.
Example
In this example, the parameters of the previously defined vpnclient entity , named
client1, are set:
Use the
list
command to verify the results of the operation:
[ipsec peer vpnclient]=>modify
name = client1
[xauthuser] = user1
[xauthpass] = *****
Please retype xauthpass for verification.
[xauthpass] = *****
[clienttype] =
generic
cisco
nortel
[clienttype] = generic
[virtualip_maptype] =
none
nat
dhcp
[virtualip_maptype] = none
[lan_range] = 10.60.11.0/24
:ipsec peer vpnclient modify name=client1 xauthuser=user1 xauthpass=_DE
V_4FDCAAB92D454D3A clienttype=generic virtualip_maptype=none lan_range=
10.60.11.0/24
[ipsec peer vpnclient]=>
[ipsec peer vpnclient]=>list
[client1]
Xauth
: user1 : ********
Client Type
: generic
Virtual IP Map Mode : none
Local LAN IP Range
: 10.60.11.0/24
[ipsec peer vpnclient]=>