4 via snmp, Debugging via snmp, Via snmp – Nortel Networks 608(WL) User Manual

Page 172: Chapter 5

Text mode
Original mode

Chapter 5

Troubleshooting SpeedTouch™ IPSec

E-DOC-CTC-20051017-0169 v0.1

170

5.4 Via SNMP

Debugging via SNMP

On the SpeedTouch™, several SNMP MIBs are available allowing to retrieve
configuration and counter information. A MIB (Management Information Base) can
be considered as a representation of a group of parameters.

A huge amount of MIB values can be retrieved remotely (e.g. traffic counters,
number of SAs, the Phase 1 and 2 parameters, …).

As the IPSec MIB is not standardized, a SpeedTouch™ proprietary IPSec MIB is
available on the SpeedTouch™ Setup CD-ROM.

SpeedTouch

620

SNMP

Manager

SNMP messages

...

ADSL MIB

IF MIB

IPSec MIB

This manual is related to the following products: