Nortel Networks 608(WL) - Manual (Page 30)

Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1 28
Buttons You can use one of the following buttons:
Remote Gateway The Remote Gateway parameters identify the peer Security Gateway in the IP
network.
Address or FQDN:
Fill out the publicly known network location of the remote Gateway. You can
specify the public IP address, if it is invariable and known. More often, the
publicly known FQDN (such as vpn.corporate.com) will be used.
Backup Address or FQDN:
This field can optionally be filled out in a configuration with a backup remote
Security Gateway. If no backup gateway is available, you leave this field open.
Click ... To ...
Use Preshared Key Authentication Reveal additional parameter fields
required for the configuration of
Preshared Key Authentication.
Use Certificate Authentication Reveal additional parameter fields
required for the configuration of
Certificate Authentication.
Specify Additional Descriptors Reveal additional fields where you can
specify alternative IKE Security
Descriptors.
Add Add a completely configured peer to the
configuration