Nortel Networks 608(WL) - Manual (Page 207)

Chapter 6
Advanced Features
E-DOC-CTC-20051017-0169 v0.1 205
6.9.3 Set or modify the Peer Option list parameters
modify command The ipsec peer options modify command allows to modify the options list
parameters.
Example In the following example, the options list parameters are modified.
[ipsec peer options]=>modify
name = opt1
[localaddr] = 10.0.0.138
[nat-t] =
enabled
disabled
[nat-t] = disabled
[dpd] =
disabled
enabled
[dpd] = enabled
[dpd_idle_period] = 150
[dpd_xmits] = 3
[dpd_timeout] = 120
[inactivity] = 3600
:ipsec peer options modify name=opt1 localaddr=10.0.0.138 nat-
t=disabled dpd=enabled dpd_idle_period=150
[ipsec peer options]=>